NOVASHIELD MONOCOAT is a unique formulation which provides total finish in one coat on all previously painted surfaces and ensures long lasting protection and decoration of all types offlat masonry surfaces.

NOVASHIELD MONOCOAT is suitable for all difficult, porous, chalky,absorbing and friable surfaces.

NOVASHIELD MONOCOAT provides total protection in extreme climates. It is not affected by temperature variations(Summer, Winter or Monsoon) or UV radiation. NOVASHIELD MONOCOAT's microporous surface is resistant to wind driven rain, and allows entrapped moisture in the wall to escape without blistering or adhesion failure NOVASHIELD MONOCOAT contains fungicide and algicides to protect the coating against any organic growth on the painted surtace.

NOVASHIELD MONOCOAT based on Pliolite resins has the unique property of self­cleaning to preserve an appearance close to the original finish.

SURFACE PREPARATION: Remove all loose and flaking materials. Make good all cracks and structural defects. All surfaces must be dry and free from mould, algae and grease.

APPLICATION

Stir well before use. No dilution is necessary. Apply by special roller one coat only.

COVERING CAPACITY: 6 to 7 Sq. Mtr/ltr.

DRY1NG TIME: Surface dry two hours and hard dry overnight

PACK SIZE: 20 Itrs, 51trs & 1ltr.

CLEANING: Clean all equipment with turpentine.

FILM THICKNESS: 65 to 70 micrones in one coat

USES:

Suitable for the renovation and protection of aU previously painted external flat masonry sutiaces.